Skip to main content
Linx Single Wall Elbow E90
Linx Single Wall Elbow ER90
Linx Single Wall Elbow ER60
Linx Single Wall Elbow E45
Linx Single Wall Elbow ER45
Linx Single Wall Elbow ER30
Linx Single Wall Elbow ER15
Linx Single Wall Elbow EM

Single Wall Elbows

Category:
Smart Part Numbers: E90 / ER90 / ER60 / E45 / ER45 / ER30 / ER15 / EM / EMV

Description

Single wall elbows are a type of duct fitting used to change the direction of single-wall round ductwork. They are made from sheet metal and either stamped or formed into an elbow shape.  Available in a 1.5-inch or 1.0-inch radius with 90 or 45-degree options.  Additional 1.0-inch radius elbows are available in 60, 30, and 15-degree options.

End Connections

  • Gasketed – Factory installed double-lipped self-sealing EPDM gasket
  • Nongasketed – Traditional “slip-fit” without gasket requiring external sealing

Specifications

E – 1.5 Inch Radius Elbow

  • Die stamped
    • Continuous stitch welded
    • Rolled edges
    • Galvanized steel only
    • Available in diameters 3″ – 12″
      note: 11″ diameter is fabricated
  • 5 to 3 piece gored (depending on degree)
    • Internally sealed
    • Available in diameters 14″ – 48″
      note: E 90 elbows 50” diameter and larger supplied as two E 45 elbows and a CF coupling

ER – 1.0 Inch Radius Elbow

  • Die stamped
    • Continuous stitch welded
    • Rolled edges
    • Galvanized steel only
    • Available in diameters 3″ – 12″
      note: 11″ diameter is fabricated
  • 4 to 2 piece gored (depending on degree)
    • Internally sealed
    • Available in diameters 14″ – 48″
      note: E 90 elbows 50” diameter and larger supplied as two E 45 elbows and a CF coupling

EM – Mitered Elbow

  • Rolled edge
  • 2″ standard throat length
  • Available in diameters 4″- 60″
  • Optional turning vanes evenly spaced (Smart Part EMV)
    • number of vanes vary by diameter
      • Ø 4″-10″ = 2 vanes
      • Ø 12″-14″ = 3 vanes
      • Ø 16″-20″ = 4 vanes
      • Ø 22″-60″ = 5 vanes